2023 Bush Hog Bush Hog® 2215 Flex-Wing Rotary Cutter
$21,850.00
Key Features
Availability
In Stock
LocationTompkins Implement
VIN
1hbyr1241100194
Condition
Excellent
Product Features
Dealer Notes
6 wheels on rear axle
Description
Bush Hog® 2215 Flex-Wing Rotary Cutter.
The Bush Hog® model 2215 Flex-Wing rotary cutter is designed to cut grass, weeds, and brush up to 3 1/2” in diameter. It is recommended for use in pasture maintenance, crop shredding, and roadside maintenance. With maintenance friendly features such as EZ clean decks, EZ lube drivelines and Bush Hog® tough durability, the 2215 is another Flex-Wing example of Bush Hog® Performance You Can Count On.
Performance Features
- Wing skids are 3/8 inch thick for extended wear and outside edges are turned up at 45 degrees to stop heavy ground contact that might damage the sidebands.
- Center section blades properly align with center wheels to closely cut out the bottom of ditches.
- Grease fittings and spring steel bushings at axle pivot points for longer life.
- Free wing float without movement of the hydraulic cylinder rod is 22 degrees down and 45 degrees up.
- Optional grass/row crop baffles for improved distribution in grass and corn stalk shredding.
Construction Features
- Center section axle spindles are centered on the axle arm for equalized loading of vertical forces.
- Patent Pending oil sight gauge takes the guess work out of checking the oil. In less than 10 seconds, all three cutting box oil levels can be checked and rechecked.
- All grease fittings on the PTO CV driveline and wing drivelines align for quick location of grease points, reducing service times.
- Greaseable Axle Pivot Points with spring steel bushings.
- Turnbuckle alignment with wing hinge pin ensures long life of turnbuckle and less hinge wear.
- Powder Coat Paint.
Safety Features
- Improved design of wing sidebands means less damage caused by sideband-to-ground contact.
Specifications
- Cutting Width: 15'
- Cutting Height: 2" – 14"
- Cutting Capacity: 3 1/2"
- Transport Width: 8' 2"
- Transport Height: 7' 3"
- Transport Length: 15' 3"
- Approximate Weight: 4,700 lb.
- Approximate Tongue Weight: 1,800 lb.
- Minimum Tractor PTO HP: 60 HP
- Hitch: Perma-Level
- Center Deck: 10GA
- Wing Decks: 10GA
- Wing Cutting Angles: 22 deg. Down And 45 deg. Up
- Wing Level Adjustment: Turnbuckles
- Sidebands: 1/4" X 13 1/2"
- Transfer Gearbox: 250 HP
- Cutting Gearboxes: 210 HP
- Input Driveline: Category 6
- Cutting Drivelines: Category 4
- Blade Holder: 7GA Round
- Blades: 1/2" X 4"
- Blade Tip Speed: 16,286 fpm
- Axle Suspension: Springs @ Each Axle
- Center & Wing Hydraulics: 3 Hoses Standard
- Safety Tow Chain: Standard
- Distribution Baffles: Optional
- PTO Driveline Support: Optional
- Warranty: 10-year Gearbox Limited Warranty; 1-year Machine Limited Warranty
NOTES:
Unit(s) shown equipped with certain selections and options; please consult with your local Bush Hog dealer for all available configurations.General
| Working Width | 15 ft. |
| Width | Transport: 8 ft. 2 in. |
| Length | Transport: 15 ft. 3 in. |
| Weight | 4700 lb. |
| Recommended HP | (PTO): 60 HP |
